Since its foundation in 2000, RegTec has been a continuously growing and successful company. The focus is on the development, production and sale of mounting systems for the generation of solar energy.

The following products of RegTec frame systems are integrated in our program PVscout 2.0
Frame SystemRoof typeSoftware Calculation
RelayPitched Roof SystemsBill of materials, statics
ReSideFlat Roof SystemsBill of materials, ballast
RelightFlat Roof SystemsBill of materials, ballast
Description and advantages of the frame systems
Relay
  • Fixings: Aluminium roof hooks
  • A sophisticated standard system with cross member profiles – suitable for all module types
  • Can be installed easily and cheaply – the type of installation recommended by many module manufacturers
  • A wide range of connection possibilities – e.g. roof hooks, hanger bolts, standing seam clamps, etc.
  • All the fixings used comply with the technical building regulations or have been given general building supervisory approval by the DIBt.
  • All the connecting elements are made from stainless steel (A2, 1.4301), and all the profile rails are made from EN AW 6063 aluminium.
  • 10-year warranty.
ReSide
  • The ReSide system was developed in order to be able to install south-facing mountings cheaply on roofs that cannot be penetrated and can only take low additional loads
  • A flat roof system for framed modules for south mountings with a 15 degree angle of inclination
  • In contrast to the classic south-facing mounting, the connection of the entire system and the wind deflectors used mean that the ballast weights are much lower.
  • Easy-to-install system because of the high level of prefabrication
  • Because of the very low use of material and the short installation times, extremely cost-effective substructures can be realized.
  • The ballast weights are calculated on the basis of the results of wind tunnel tests.
  • The optimized ventilation zone ratio gives good back-ventilation and prevents output losses due to unfavourable temperatures.
Relight
  • The ReLight was developed in order to optimize yields as a function of the roof area.
  • East-west mounting with 10 degree angle of inclination.
  • In contrast to the classic south-facing mounting, the spacing between the individual rows is reduced to a minimum. This allows a much more efficient use of the roof surface.
  • The individual mountings are linked with each others via profile rails, creating a continuous, homogeneous module field. This considerably reduces the ballast weight required.
  • Because of the very low use of material and the short installation times, extremely cost-effective substructures can be realized.
  • The ballast weights are calculated on the basis of the results of wind tunnel tests
  • The simple construction means that installation is extremely quick and cost-effective, especially with the swivellable lower module clamp without screw connection.
  • The optimized ventilation zone ratio gives good back-ventilation and prevents output losses due to unfavourable temperatures.
Licenses can be ordered conveniently at our online shop.

go to our onlineshop

An overview of all mounting systems integrated in PVscout 2.0

Overview

Further information on these products can be obtained directly from the manufacturer:

To manufacturer